Today Lets take a look at the 10" Bosch Miter Saw. A side note here, I have one of these saws and absolutely love it. I have used it for years in my business and it has performed flawlessly for years. One small problem I had a few years back was the switch that turns the motor on and off wore out but I am convinced it was from so much usage.
I did not buy mine from Amazon however I would not be afraid to as I have ordered other tools from them with very speedy service and with really good luck.
Lets see what other people say about this saw:
-Incredible - You can't go wrong with this saw! - Other tidbits include an easy to use depth stop for cutting grooves, pullout extension slides for the table, and a 3 way adjustable handle for comfort on all cuts. I just don't see how a miter saw can get any better than this.
-IN A LEAGUE OF ITS OWN.....I just received my Bosch 4410 dual compound sliding miter saw from UPS today. I used the Dewalt 12" sliding compound miter saw to build a Decorator's Showhouse style home. All I can say is that the Bosch 4410 is far superior. It is smoother, quieter, prettier, easier to carry, and seems far more powerful.
-If you are like me, the first thing that runs through your mind when looking at an expensive tool is 'Wow! But is it worth the money.
-The 4410 is an outstanding piece of machinery! A lot of money but worth it!
-Terrific, Every once in a while a piece of machinery comes out and changes the industry forever, the sliding dual bevel miter saw is one of these remarkable inventions. Bosch has truly separated themselves with the 4410 and 4412.
NOW SOME BAD (Every tool has bad reviewers)
-The features are great, but the overall performance is very lacking. When I went to check the saw for trueness I was suprised to find the fence was out of square by in excess of 3 degrees.
-I was excited about this saw when it first arrived, and it worked well until the warranty expired. When it went out of square, the autorized repair shop, with direction from Bosch, quoted over $350 to fix and said even that might not do it. They said it had been dropped or run over by a truck, both of which would be difficult since the saw had been on a stand since it was new.
Here the good reviewers seem to out number the bad. You have to understand that sometimes you might just get a lemon and it does happen with every tool. Like I said I own one of these saws and if I was to go buy a new one I would start my research with Bosch because of the good luck I have had.
-
Friday, April 22, 2011
Wednesday, April 20, 2011
The 12 Inch DeWalt Miter Saws
The 12 Inch DeWalt Miter Saws are one of the most well known products to have come out from DeWalt. Almost all the reviewers agree with the fact that the overall build quality of 12 Inch DeWalt miter saws is excellent. Here are what some reviewers say, good and bad.
- The 12 Inch DeWalt Miter Saw is very powerful and smooth, and the laser works well, though it took a while to get it set up.
- If I had a con, it would be that the dust collector bag is small and stingy.
- I decided to try this Dewalt because it was belt drive, and I thought that would smooth it out on fierce cuts. That proved to be the case, it has been a very good and very smooth saw. So far, no problems, have had it about a year and half. It also has very good power. Adjustments are easy, table section is reasonably stout.
All in all, I am pleased.
- Out of the box The 12 Inch DeWalt Miter Saw was nearly perfect. But as stated by others, the throat plate stinks. It's a cheap piece of plastic. It bows in the center and will throw off your cut. I removed it and the bow remained. I tossed it. I'll buy the zero clearance metal plate or maybe make a couple from hardwood.
The blade cuts well but leaves a rough edge. It would be a good blade for cutting dimentional lumber but not for furniture grade hardwoods.
- I was impressed with Amazon's shipping speed...2 days! WOW!! The saw was ready to go right out of the box...and needed no adjustments. This saw will cut through anything...especially the 6 1/2" crown molding I have! The fence is great and accurate...makes bevels a sinch to perform. I am very pleased with the saw.
- The DW716 miter saw I purchased meets all my expectations and was just the item I was looking for. The only disapointment is the blade that was sent with thew saw. It doesn't make clean cuts when mitering trim and splinters the wood making trim cuts unacceptable. I had to replace trhe blade with on I had just to make clean cuts.
The worst review is at the bottom of the list and as you can see it is not really a bad review. I have used the 12 Inch DeWalt Miter Saw and it performed extremely well for me.
- The 12 Inch DeWalt Miter Saw is very powerful and smooth, and the laser works well, though it took a while to get it set up.
- If I had a con, it would be that the dust collector bag is small and stingy.
- I decided to try this Dewalt because it was belt drive, and I thought that would smooth it out on fierce cuts. That proved to be the case, it has been a very good and very smooth saw. So far, no problems, have had it about a year and half. It also has very good power. Adjustments are easy, table section is reasonably stout.
All in all, I am pleased.
- Out of the box The 12 Inch DeWalt Miter Saw was nearly perfect. But as stated by others, the throat plate stinks. It's a cheap piece of plastic. It bows in the center and will throw off your cut. I removed it and the bow remained. I tossed it. I'll buy the zero clearance metal plate or maybe make a couple from hardwood.
The blade cuts well but leaves a rough edge. It would be a good blade for cutting dimentional lumber but not for furniture grade hardwoods.
- I was impressed with Amazon's shipping speed...2 days! WOW!! The saw was ready to go right out of the box...and needed no adjustments. This saw will cut through anything...especially the 6 1/2" crown molding I have! The fence is great and accurate...makes bevels a sinch to perform. I am very pleased with the saw.
- The DW716 miter saw I purchased meets all my expectations and was just the item I was looking for. The only disapointment is the blade that was sent with thew saw. It doesn't make clean cuts when mitering trim and splinters the wood making trim cuts unacceptable. I had to replace trhe blade with on I had just to make clean cuts.
The worst review is at the bottom of the list and as you can see it is not really a bad review. I have used the 12 Inch DeWalt Miter Saw and it performed extremely well for me.
Thursday, April 14, 2011
The 10 Inch DeWalt Miter Saws
The 10 Inch DeWalt Miter Saws come with a lot of innovative features. They are one of the most popular names on the market today. The saw is very sturdy and will last for years. Here are what some of the reviewers say about this saw:
--Miter adjustment is rock solid. The quick detents have no wiggle room at all, and the detent override makes it easy to adjust to any angle. The simple push-down miter lock is easy to use, and once locked I was unable to force it slip to either side.
--For trim work, I have found you just don't need to buy a saw with lasers and clamps and whatever else. Just buy the right saw the first time, a sturdy one like the DW713.
--I watched this 10 Inch DeWalt Miter Saw get day in and day out abuse from students who cut too fast, started the saw while touching the work, let the saw run too long, let the saw snap back to its upright position, chopped wood not against the fence, never cleaned the blade or used wicked dull blades all day. Long story short: you couldn't find a better field testing environment than a high school shop class. Despite this merciless abuse, this saw cut perfectly accurate.
--This 10 Inch DeWalt Miter Saw has adequate power and does not bog down unless you really try to rush it which is a bad idea to start with. I cut plenty of hardwood with it and have had no problems.
The saw is very accurate, mine was perfect out of the box.
--The 10 Inch DeWalt Miter Saw is a handy size, and it has a nice carrying handle. The miter adjustment is the best design I have tried.
Every tool has some bad reviews but all in all there are not a lot of bad reviews for this product worth mentioning.
--Miter adjustment is rock solid. The quick detents have no wiggle room at all, and the detent override makes it easy to adjust to any angle. The simple push-down miter lock is easy to use, and once locked I was unable to force it slip to either side.
--For trim work, I have found you just don't need to buy a saw with lasers and clamps and whatever else. Just buy the right saw the first time, a sturdy one like the DW713.
--I watched this 10 Inch DeWalt Miter Saw get day in and day out abuse from students who cut too fast, started the saw while touching the work, let the saw run too long, let the saw snap back to its upright position, chopped wood not against the fence, never cleaned the blade or used wicked dull blades all day. Long story short: you couldn't find a better field testing environment than a high school shop class. Despite this merciless abuse, this saw cut perfectly accurate.
--This 10 Inch DeWalt Miter Saw has adequate power and does not bog down unless you really try to rush it which is a bad idea to start with. I cut plenty of hardwood with it and have had no problems.
The saw is very accurate, mine was perfect out of the box.
--The 10 Inch DeWalt Miter Saw is a handy size, and it has a nice carrying handle. The miter adjustment is the best design I have tried.
Every tool has some bad reviews but all in all there are not a lot of bad reviews for this product worth mentioning.
Subscribe to:
Posts (Atom)